If you trade or process PET recyclate, you have almost certainly used both terms - PET flake and food-grade rPET. But in a conversation between a buyer and a seller, those two terms can mean very different things. Getting the distinction wrong leads to wrong pricing, rejected loads, and failed transactions.
Here is what actually separates the two grades - and why it matters when you are sourcing or selling on a platform like Inacsys.
What is PET Flake?
PET flake is the intermediate form of recycled PET produced after post-consumer bottles or other PET packaging are sorted, washed, and shredded. The output is a clean, dry flake - typically clear, light blue, or mixed colour - but it has not been through a process that qualifies it for direct food contact.
PET flake is a commodity grade. It trades in large volumes and is used as feedstock for fibre (polyester staple fibre, geotextiles, strapping), non-food thermoforms, and as input into further processing. It is priced relative to its colour, moisture content, contamination level, and intrinsic viscosity (IV).
What is Food-Grade rPET?
Food-grade rPET has gone one step further. After washing and flaking, the material goes through a solid-state polycondensation (SSP) process - or an equivalent approved decontamination step - that raises the IV back to bottle-grade specifications and reduces volatile contaminants to levels approved by the US FDA, EFSA, or equivalent food safety authority.
The result is a pellet or flake that can legally and technically re-enter food packaging: bottles, trays, and in some cases films. The qualification is not just about cleanliness. It requires the processor to operate under a validated process, typically with regulatory approval specific to that production line and input material.
The Price Gap - and What Drives It
The gap between PET flake and food-grade rPET is not fixed. It moves with brand demand, regulatory tightening, and feedstock availability.
In a typical market, food-grade rPET pellet trades at a significant premium - often in the range of USD 150 to 300 per tonne above commodity PET flake - though this spread widens when brand owners are under pressure to hit recycled content targets. The gap narrows when demand is soft or when virgin PET is priced very low.
For buyers, paying for food-grade without the certification to prove it - or receiving material that has not gone through an approved process - is both a commercial and a regulatory risk. For sellers, marketing flake as food-grade without the validation is a liability.
What Buyers Need to Check
If you are sourcing material described as food-grade rPET, ask for:
- The decontamination process used (SSP, chemical recycling, or equivalent)
- The regulatory approvals held by the producing facility (FDA letter of non-objection, EFSA positive opinion, or local equivalent)
- IV range and consistency data
- Colour specification (food-grade is almost always clear, with strict limits on mixed colour)
- Moisture content on delivery
A reputable seller will have this documentation. If documentation is not available, the material is likely commodity flake, however it is described.
What Sellers Need to Know
If you hold material that genuinely qualifies as food-grade rPET, the listing should state the certification, the IV range, and the process. These details increase buyer confidence and justify the premium. Listing it without specification means buyers will price it as commodity flake - because they cannot verify otherwise.
On the Inacsys Circular Industry Cloud, sellers can specify grade, process, and documentation level. Buyers searching for food-grade rPET can filter accordingly and reach verified sellers who have the right material.
The market for food-grade rPET is growing. EPR legislation and brand commitments to recycled content are driving demand that commodity PET flake cannot satisfy. For traders and processors who can verify what they hold, there is a real commercial advantage in getting the distinction right.
Reuse - Upcycle - Recycle